Our pocket lighters are made in the automated production line, which undergo automatic vacuum gas filling, automatic flame height detection, automatic ignition rate detection, automatic leakage rate detection, automatic printing, and automatic packaging. Accurate and stable machine puts an end to human-induced quality problems!

Pure butane gas under low pressure at room temperature is hard to damage the gas chamber. It is also hard to diffuse, which will have a slight impact on the continuous ignition rate, but for safety, we still choose pure isobutene gas!

The windproof flame can be used under the strong wind and you can aim the flame at any angle. It can ignite incense, candle, and firecracker, etc. (Note that the windproof flame is relatively high temperature flame and is only for daily lighting use. Please do not continuously ignite more than 10 seconds!) It puts an end to the damages of the ordinary lighters whose flames only burn upward.

Electronic lighter press pressure can achieve 6KG-14KG according to customers’ requirements. At least 85% of children under 6 years old cannot press down and use the lighter!

The use of double-wheeled sliding sparkwheel makes the lighter could not ignite under low pressure to protect children from getting hurt!

As plastic delivers good performance with a variety of features, including heat, oil/chemical corrosion and cracking resistance (the highest working temperature ranges from 75°C to 90°C), good mechanical strength, good impact resistance, thermal deformation resistance characteristics, geometric stability, excellent gloss.

Patented valve for fixed flame enormously enhances the lighter safety performance and there is no need to adjust the fire. Flames of the lighter will adjust heights automatically according to temperature changes no matter in winter or summer and always remain in the safe range. Under normal temperature, the maximum height of flame will not exceed 5cm. The valve design thoroughly eliminates the possibility of burning hair and eyebrows due to the more than 10 cm heights flames.

Ordinary lighter flame due to the work principle of outlet and outlet valve structure will appear different forms after the action of the press, and there is still gas escape and flame cannot be extinguished immediately, resulting in accidents. Weicheng lighters are equipped with valve for fixed flame. Once the press action ends, the gas will stop diffuse and the flame will be extinguished.

Modular design and use of minimal spare parts reduce the possibility of accidents. Our lighters can be split to only 4-6 parts, delivering extreme operational simplicity and the highest security.